Resources for Building Owners & Managers
After a roof inspection, you should know what the contractor found, where the problems are and what to do about them.
Here is how to prepare for the visit, make sense of the report and decide what work to approve. Your contractor will inspect the roof and explain which checks or tests are needed for your building.
Tell the contractor why you need an inspection
Tell the contractor what prompted your call. Is the roof leaking again? Are you planning next year’s budget, checking a building you want to buy or trying to understand a replacement proposal? That information helps the contractor plan the visit and give you answers that fit the problem you are trying to solve.
Before the visit, agree on which roof sections will be inspected, how the contractor will reach them and what you will receive afterward. Ask whether the visit includes checking inside the building, taking photographs, writing a report or testing for problems below the roof surface. A visual inspection alone cannot tell you the condition of every hidden layer.
-
Gather the roof paperwork
Gather roof plans, earlier inspection reports, repair invoices and warranty documents. If you know that one roof section was installed later than another or uses a different material, point that out. Tell the contractor when records are missing rather than guessing when work was done.
-
Explain where and when you noticed trouble
Write down where water appeared inside and when it happened. Did it follow rain, wind or a visit from someone servicing rooftop equipment? Share dated photos taken from places you can safely reach inside the building. A ceiling stain helps locate the trouble indoors, but water can enter the roof somewhere else.
-
Explain what the contractor needs to work around
Point out equipment that needs protection, areas people are using, delivery routes and any places the contractor cannot enter. Mention recent work on rooftop equipment. Choose someone at the building who can answer questions during the visit and receive the report afterward.
Make sure the report shows where the problems are
A good report tells you what is wrong, where it is and what the contractor recommends doing about it. “Several repairs needed” does not tell you much. A marked roof plan or labeled photograph helps you find the problem later, even if you were not there when the contractor inspected it.
| Report item | What it should explain | What you can decide |
|---|---|---|
| Location and condition | Where the problem is, what the contractor found and a photo or label showing the location. | See whether it explains the trouble you reported or points to another area needing attention. |
| Recommended work | What needs repairing, maintaining or checking further, and why. | Decide what to approve now and what questions still need answers. |
| Urgency and area covered | Which items need prompt attention, which can be planned for later and where the work is needed. | Plan the cost, access and timing around the people using the building. |
| Limits and exclusions | Areas the contractor could not reach, hidden materials that were not checked and tests not performed. | Understand what the contractor knows and what still needs to be checked. |
Ask questions about anything the report does not explain. If the proposed repair covers more area than the damage shown in a photo, ask why. If the contractor gives the roof a condition rating, ask what the rating means and what work it calls for. A score by itself will not tell you what to budget or which section needs attention first.
Understand what the inspection can tell you
What the contractor saw
A photograph can show an opening, material that has moved, debris around a drain or damaged flashing. The report should explain what you are looking at and where it is.
What needs a closer look
Testing or opening part of the roof can help answer questions about hidden materials. Agree on what will be done, where, who approves it and who will repair any openings afterward.
What is still unknown
Weather, access or the type of inspection can leave questions unanswered. Ask the contractor to point out those gaps and explain what it would take to answer them.
A drone image or photograph shows the roof surface. It does not tell you whether all the insulation beneath it is dry or how well every layer is attached. If the contractor recommends a test, ask what it will reveal and how the answer will change the proposed work. You should understand why the test is being recommended, even if you are unfamiliar with the equipment.
For the service details, see what a commercial roof inspection covers. If the recommendation leads to a larger project, the repair, restoration and replacement guide explains how to organize those choices.
Keep track of what gets repaired
After the inspection, confirm which repairs you have approved and which recommendations you are still considering. Keep the inspection report, the agreed work and the record of completed repairs together. Ask for photos and descriptions of repairs that will be covered up, so someone reviewing the roof later can see what was done.
Plan the next inspection with your contractor, taking the roof type, its written requirements and the building’s conditions into account. The roof maintenance guide explains how regular checks and repair records help you look after the roof. NRCA’s building-owner guidance for structural metal roofs also emphasizes a scheduled inspection and maintenance program.
Check your roof warranty before arranging work on a problem you think it covers, or before making changes to the roof. The reporting and approval requirements can differ from those for ordinary maintenance. For example, Carlisle’s maintenance guidance directs owners to contact its warranty service before repair work on a potential warranty issue. The actual requirements for your roof come from its own documents.
Frequently Asked Questions
What should I receive after a commercial roof inspection?
Ask for a written report showing the areas inspected, what the contractor found, photographs and recommended work. It should also identify anything that was not checked. Agree beforehand whether tests, repairs or a replacement estimate are included.
Can a visual inspection confirm that insulation is dry?
No. Looking at the roof surface does not tell you whether all the insulation beneath it is dry. The contractor should explain whether testing is needed and what the results will tell you.
Should I go onto the roof before the contractor arrives?
You do not need to go onto the roof to prepare. Share the records you have and describe what you have noticed from places you can safely reach. Leave the roof access and protection needed for the inspection to the contractor.
Does an inspection automatically include repairs?
No. Ask what the visit includes. If you want the contractor to make repairs during the inspection, agree on the work and spending limit beforehand.
Talk with a contractor about your roof
Choice Roof Contractor Group helps building owners connect with independent roofing contractors. Your request can go to a member or non-member. The contractor will evaluate the building, explain the recommended work and provide the estimate and project terms.

